An RGB LED module is a versatile lighting component that can produce millions of colours by mixing red, green, and blue light. The RGB LED module used in this ESP32-S3 Box-3 Arduino programming ...
Sometime after SimpleFOC2.2 a bug was introduced that made the phase current reading bad, the symptoms were bad stability and noisy FOC Torque mode. The phase currents looked discontinued instead of a ...
Bojan Jurca’s open-source Arduino sketch "Esp32_oscilloscope," transforms any ESP32 board to function as a web-based oscilloscope accessible over WiFi. While the Scoppy project demonstrated the ...
After a major water leak flooded my home, I realized alerts alone weren’t sufficient—I needed automatic shutoff. This project combines a hacked Gröhe Guard system, an Arduino Nano, an ESP32, and the ...
In case you missed it, the big news is that a minimal Arduino core is up and working on the ESP32. There’s still lots left to do, but the core functionality — GPIO, UART, SPI, I2C, and WiFi — are all ...
It's based on the ATmega 328 version: https://github.com/TheDIYGuy999/Rc_Engine_Sound and on bitlunis Halloween example: https://github.com/bitluni/MotionPumpkin ...
Some of the newer Espressif Systems wireless SoCs such as the ESP32-H2 and ESP32-C6 support Zigbee through their built-in 802.15.4 radio. It’s been working since the release of the ESP-IDF 5.1 ...
We previously noted the ESP32 Arduino Core 3.0.0 Alpha release added support for ESP32-C6 and ESP32-H2 among other changes. The good news is that Arduino ESP32 Core 3.0.0 is now considered stable, and ...
Results that may be inaccessible to you are currently showing.
Hide inaccessible results
Feedback